Rate laws – differential form

differential rate law mathematically describes the rate of a reaction in terms of the change in the concentration of a reactant over time.

Eq6 of the previous article is an example of a differential rate law, which is further analysed by considering the decomposition of dinitrogen pentoxide in a rigid vessel:

N_2O_5(g)\rightleftharpoons 2NO_2(g)+\frac{1}{2}O_2(g)\; \; \; \; \; \; \; \; 7

We can monitor the progress of the reaction by measuring the amount of NO2 liberated via spectroscopic methods, with eq1 becoming:

rate=\frac{change\, in\, amount\, of\, NO_2}{change\, in\, time}

Since the magnitude of the overall rate of a reaction is the same regardless of the chemical species monitored, if we were able to also measure the amount of O2 produced or the amount of N2O5 consumed, we would have:

\frac{change\, in\, amt\, of\, NO_2}{change\, in\, time}=\frac{change\, in\, amt\, of\, O_2}{change\, in\, time}=-\frac{change\, in\, amt\, of\, N_2O_5}{change\, in\, time}\; \; \; \; \; \; \; \; 8

However, for every two moles of NO2 produced over a certain time, t, half a mole of O2 is liberated and 1 mole of 2O5 is consumed. This is inconsistent with eq8, as \frac{2}{t}\neq \frac{0.5}{t}\neq -\frac{-1}{t}. Therefore, eq8 has to be modified as follows:

\frac{1}{4}\frac{change\, in\, amt\, of\, NO_2}{change\, in\, time}=\frac{change\, in\, amt\, of\, O_2}{change\, in\, time}=-\frac{1}{2}\frac{change\, in\, amt\, of\, N_2O_5}{change\, in\, time}

Since the volume of the vessel V is constant, we can divide the modified equation throughout by V and express the rate of reaction in terms of the rate of change in concentrations of the species:

\frac{1}{4}\frac{d[NO_2]}{dt}=\frac{d[O_2]}{dt}=-\frac{1}{2}\frac{d[N_2O_5]}{dt}\; \; \; \; \; \; \; \; 9

Eq9 shows that even though the rate of consumption of a species in a reaction may be different from the rate of formation of another species in the same reaction, the magnitude of the overall rate of the reaction must be the same, regardless of the species we are measuring. If we rewrite eq7 as: 2N_2O_5(g)\rightleftharpoons 4NO_2(g)+O_2(g) and compare it with eq9, we see that:

    1. the rate of change of a species in a reaction is multiplied by the reciprocal of its stoichiometric coefficient; and
    2. the rate of change of a reactant is further multiplied by -1

Hence, we can write the differential rate equation for the decomposition of N2O5 as:

\frac{1}{4}\frac{d[NO_2]}{dt}=k[N_2O_5]\; \; or\; \;\frac{d[O_2]}{dt}=k[N_2O_5]\; \; or\; \;-\frac{1}{2}\frac{d[N_2O_5]}{dt}=k[N_2O_5]

In general, for a reaction aA+bB+...\rightarrow pP+qQ+...

rate=\frac{1}{p}\frac{d[P]}{dt}=\frac{1}{q}\frac{d[Q]}{dt}=...=-\frac{1}{a}\frac{d[A]}{dt}=-\frac{1}{b}\frac{d[B]}{dt}=...\; \; \; \; \; \; \; \; 10

Comparing the rate equations for the reaction between CaCO3 and HCl (eq6) and that for the decomposition of N2O5, we see that the rates of reaction are directly proportional to the concentration of the respective reactants. This, however, is not always the case. For certain reactions, the rate can be proportional to the square of the reactant or even proportional to the product of the concentrations of two or more reactants. Here are some examples of rate laws:

Stoichiometric equation

Rate law

CH3COOC2H5 + OHCH3COO+ C2H5OH rate = k[CH3COOC2H5][OH]
CH3CHO CH4 + CO rate = k[CH3CHO]3/2
2N2O5  → 4NO2 + O2 rate = k[N2O5]
NO2 + CO NO2 + CO2 rate = k[NO2]2

In short, a rate law cannot be predicted from the reaction’s stoichiometric equation. It has to be determined experimentally.

 

Question

The differential rate equation of eq7 can be expressed as \frac{d[N_2O_5]}{dt}=-k[N_2O_5]. If eq7 is written as 2N_2O_5\rightleftharpoons 4NO_2+O_2, the rate equation will be \frac{d[N_2O_5]}{dt}=-2k[N_2O_5]. How do we reconcile the difference?

Answer

For the first rate equation, \frac{d[N_2O_5]}{dt}=-k_1[N_2O_5]

where k1 is the rate constant with reference to the reaction N_2O_5\rightleftharpoons 2NO_2+\frac{1}{2}O_2.

For the second rate equation, \frac{d[N_2O_5]}{dt}=-2k_2[N_2O_5]

where k2 is the rate constant with reference to the reaction 2N_2O_5\rightleftharpoons 4NO_2+O_2.

Comparing the two rate equations, k1 = 2k2.

A reaction can be written in many ways by multiplying or dividing the stoichiometric coefficients on both sides of the reaction by different factors. This implies that many rate equations can be written for a particular reaction. We just need to specify which stoichiometric form of the reaction we are referring to for the rate equation presented.

 

Next article: Order of a reaction
Previous article: Rate laws
Content page of intermediate chemical kinetics
Content page of intermediate chemistry
Main content page

Leave a Reply

Your email address will not be published. Required fields are marked *