Composite systems

A composite system is one that has more than one part, e.g. a system of two spin- $\frac{1}{2}$ particles. One possible way to denote a basis set for the eigenstates of the two spin- $\frac{1}{2}$ particles system is:

$\uparrow\uparrow\; \; \; \; \uparrow\downarrow\; \; \; \; \downarrow\uparrow\; \; \; \; \downarrow\downarrow$

or in terms of the $z$ -component of the spins:

$\vert +z,+z\rangle\; \; \; \;\vert +z,-z\rangle\; \; \; \;\vert -z,+z\rangle\; \; \; \;\vert -z,-z\rangle$

where the 1^st term and 2^nd term in the each basis state refer to the $z$ -component spin states of the 1^st particle and that of the 2^nd particle respectively. Note that the full notation of $\vert +z,+z\rangle$ is $\vert s=\frac{1}{2},m_s=\frac{1}{2};s=\frac{1}{2},m_s=\frac{1}{2}\rangle$ , which can be condensed to $\vert m_s=\frac{1}{2},m_s=\frac{1}{2}\rangle$ , or simply $\vert +z,+z\rangle$ .

To represent the 4 kets in column vector form, we borrow the notation of basis vectors that are used to derive the Pauli matrices and give the kets the following assignments:

$\vert +z,+z\rangle=\begin{pmatrix} 1\\0 \\0 \\ 0 \end{pmatrix} \; \; \; \;\vert +z,-z\rangle=\begin{pmatrix} 0\\1 \\0 \\ 0 \end{pmatrix}$

$\vert -z,+z\rangle=\begin{pmatrix} 0\\0 \\1 \\ 0 \end{pmatrix} \; \; \; \;\vert -z,-z\rangle=\begin{pmatrix} 0\\0 \\0 \\ 1 \end{pmatrix} \; \; \; \; \; \; \; \; 193$

If you’ve read the article on Kronecker product, you’ll realise that

$\begin{pmatrix} 1\\0 \end{pmatrix}\otimes\begin{pmatrix} 1\\0 \end{pmatrix}=\begin{pmatrix} 1\\0 \\ 0 \\ 0 \end{pmatrix} \; \; \; \;\begin{pmatrix} 1\\0 \end{pmatrix}\otimes\begin{pmatrix} 0\\1 \end{pmatrix}=\begin{pmatrix} 0\\1 \\ 0 \\ 0 \end{pmatrix}$

$\; \; \; \;\begin{pmatrix} 0\\1 \end{pmatrix}\otimes\begin{pmatrix} 1\\0 \end{pmatrix}=\begin{pmatrix} 0\\0 \\ 1 \\ 0 \end{pmatrix}\; \; \; \;\begin{pmatrix} 0\\1 \end{pmatrix}\otimes\begin{pmatrix} 0\\1 \end{pmatrix}=\begin{pmatrix} 0\\0 \\ 0 \\ 1 \end{pmatrix}$

Therefore,

$\vert\pm z,\pm z\rangle=\vert\pm z\rangle_1\otimes\vert\pm z\rangle_2\; \; \; \; \; \; \; \; 194$

Eq194 is called the uncoupled representation of the state of the system. The general state of the system, which is called the coupled representation, is a linear combination of the four basis states:

$\small \vert\psi\rangle=c_1\vert +z\rangle_1\otimes\vert +z\rangle_2+c_2\vert +z\rangle_1\otimes\vert -z\rangle_2+c_3\vert -z\rangle_1\otimes\vert +z\rangle_2+c_4\vert -z\rangle_1\otimes\vert -z\rangle_2\; \; \; \; \; \; 195$

where $\small c_1$ , $\small c_2$ , $\small c_3$ and $\small c_4$ are constants called Clebsch-Gordan coefficients.

Eq195 is often written in the general form:

$\small \vert J,M_J\rangle=\sum_{m_{j1}+m_{j2}=M_J}C_{j_1,m_{j1};j_2,m_{j2}}^{JM_J}\vert j_1,m_{j1};j_2,m_{j2}\rangle$

Question

Why is eq194 the uncoupled representation, while eq195 is the coupled representation? Why is $\small m_{j1}+m_{j2}=M_J$ ?

Answer

The $\small z$ -component of the spins in the basis vectors $\small \vert\pm z\rangle_1$ and $\small \vert\pm z\rangle_2$ that form the state $\small \vert\pm z,\pm z\rangle$ in eq194 are assumed to behave independently (non-interacting), whereas the state $\small \vert\psi\rangle$ in eq195 takes into account the coupled interactions of the spins. For example, the coupled representation is used for the singlet and triplet states (interacting spins), while both the coupled and uncoupled representations are utilised in deriving atomic term symbols where spin-orbit coupling is neglected.

In terms of $\small m_{j1}+m_{j2}=M_J$ , see the derivation of eq207 for explanation.

Consider the Hilbert spaces $\small H_1$ and $\small H_2$ that are spanned by the basis states $\small \begin{pmatrix} 1\\0 \end{pmatrix}_1,\begin{pmatrix} 0\\1 \end{pmatrix}_1$ and $\small \begin{pmatrix} 1\\0 \end{pmatrix}_2,\begin{pmatrix} 0\\1 \end{pmatrix}_2$ respectively. The Hilbert space of the composite system of the two spin- $\small \frac{1}{2}$ particles is the Kronecker product of $\small H_1$ and $\small H_2$ , i.e. $\small H_1\otimes H_2$ . To construct a total spin angular momentum operator for $\small H_1\otimes H_2$ , we have to consider the following:-

According to the principle of the conservation of angular momentum of a system, the total $\small z$ -component of the orbital angular momentum of a system is the sum of all $\small z$ -components of the orbital angular momentum of particles constituting the system $\small L_z=\sum_{i=1}^{n}l_{z,i}$ . The total $\small z$ -component of spin angular momentum, which is also a form of angular momentum, is postulated to be the sum of all $\small z$ -components of the spin angular momentum of particles constituting the system $\small S_z=\sum_{i=1}^{n}s_{z,i}$ .
The spin operator $\small \hat{S}_z^{\; (1)}$ that acts on eigenstates in the Hilbert space $\small H_1$ , and the spin operator $\small \hat{S}_z^{\; (2)}$ that acts on eigenstates in the Hilbert space $\small H_2$ , are 2×2 matrices.
The eigenvectors in $\small H_1\otimes H_2$ are column vectors with 4 elements, and hence, the spin operator must be a 4×4 matrix.

Taking the above points in consideration, $\small \hat{S}_z^{\; (1)}$ and $\small \hat{S}_z^{\; (2)}$ acting on $\small \vert\pm z\rangle_1\otimes\vert\pm z\rangle_2$ in the Hilbert space $\small H_1\otimes H_2$ are defined as:

$\small \left ( \hat{S}_z^{\; (1)}\otimes I\right ) \left ( \vert\pm z\rangle_1\otimes\vert\pm z\rangle_2\right )=\hat{S}_z^{\; (1)} \vert\pm z\rangle_1\otimes\vert\pm z\rangle_2$

and

$\small \left (I\otimes\hat{S}_z^{\; (2)}\right ) \left ( \vert\pm z\rangle_1\otimes\vert\pm z\rangle_2\right )=\vert\pm z\rangle_1\otimes\hat{S}_z^{\; (2)} \vert\pm z\rangle_2$

respectively, where $\small I$ is the 2×2 identity matrix.

The total $\small z$ -component spin angular momentum operator $\small \hat{S}_z^{\; (T)}$ that acts on the eigenstates in the Hilbert space $\small H_1\otimes H_2$ is therefore:

$\small \hat{S}_z^{\; (T)}=\hat{S}_z^{\; (1)}\otimes \hat{S}_z^{\; (2)}\; \; \; \; \; \; \; \; 196$

Substituting eq174 into the above equation,

$\hat{S}_z^{\; (T)}=\frac{\hbar}{2}\begin{pmatrix} 1 &0 &0 &0 \\ 0 &1 &0 &0 \\ 0 &0 &-1 &0 \\ 0 &0 &0 &-1 \end{pmatrix}+\frac{\hbar}{2}\begin{pmatrix} 1 &0 &0 &0 \\ 0 &-1 &0 &0 \\ 0 &0 &1 &0 \\ 0 &0 &0 &-1 \end{pmatrix}=\hbar\begin{pmatrix} 1 &0 &0 &0 \\ 0 &0 &0 &0 \\ 0 &0 &0 &0 \\ 0 &0 &0 &-1 \end{pmatrix}\; \; \; \; \; \; \; \; 197$

Similarly, from eq177

$\hat{S}_x^{\; (T)}=\frac{\hbar}{2}\begin{pmatrix} 0 &0 &1 &0 \\ 0 &0 &0 &1 \\ 1 &0 &0 &0 \\ 0 &1 &0 &0 \end{pmatrix}+\frac{\hbar}{2}\begin{pmatrix} 0 &1 &0 &0 \\ 1 &0 &0 &0 \\ 0 &0 &0 &1 \\ 0 &0 &1 &0 \end{pmatrix}=\frac{\hbar}{2}\begin{pmatrix} 0 &1 &1 &0 \\ 1 &0 &0 &1 \\ 1 &0 &0 &1 \\ 0 &1 &1 &0 \end{pmatrix}\; \; \; \; \; \; \; \; 199$

and from eq178

$\hat{S}_y^{\; (T)}=\frac{\hbar}{2}\begin{pmatrix} 0 &0 &-i &0 \\ 0 &0 &0 &-i \\ i &0 &0 &0 \\ 0 &i &0 &0 \end{pmatrix}+\frac{\hbar}{2}\begin{pmatrix} 0 &-i &0 &0 \\ i &0 &0 &0 \\ 0 &0 &0 &-i \\ 0 &0 &i &0 \end{pmatrix}=\frac{\hbar}{2}\begin{pmatrix} 0 &-i &-i &0 \\ i&0 &0 &-i \\ i &0 &0 &-i \\ 0 &i &i &0 \end{pmatrix}\; \; \; \; \; \; \; \; 200$

Next, we shall derive the matrix for $\hat{{S}^{2}}^{(T)}$ . With regard to eq196, since $s_{z,max}=S$ , $\hat{S}_{z,max}^{\;\; \; \; \; \; \; \; (1)}\otimes I+I\otimes\hat{S}_{z,max}^{\;\; \; \; \; \; \; \; (2)}$ is equivalent to $\hat{S}^{(T)}=\hat{S}^{(1)}\otimes I+I\otimes\hat{S}^{(2)}$ . Therefore,

$\hat{{S}^{2}}^{(T)}=\left ( \hat{S}^{(1)}\otimes I+I\otimes\hat{S}^{(2)} \right )^{2}=\hat{{S}^{(1)}}^{2}\otimes I+2\hat{S}^{(1)}\otimes\hat{S}^{(2)}+I\otimes\hat{{S}^{(2)}}^{2}\; \; \; \; \; \; \; \; 201$

Substitute eq173 and eq179 in eq201,

$\hat{{S}^{2}}^{(T)}=\frac{3}{2}\hbar^{2}\begin{pmatrix} 1 &0 &0 &0 \\ 0 &1 &0 &0 \\ 0 &0 &1 &0 \\ 0 &0 &0 &1 \end{pmatrix}+\frac{\hbar^{2}}{2} \left ( \hat{\sigma}_x\otimes\hat{\sigma}_x+\hat{\sigma}_y\otimes\hat{\sigma}_y+\hat{\sigma}_z\otimes\hat{\sigma}_z \right ) \; \; \; \; \; \; \; \; 202$

Substitute eq180 in the above equation and simplifying,

$\hat{{S}^{2}}^{(T)}=\hbar^{2}\begin{pmatrix} 2 &0 &0 &0 \\ 0 &1 &1 &0 \\ 0 &1 &1 &0 \\ 0 &0 &0 &2 \end{pmatrix}\; \; \; \; \; \; \; \; 203$

Question

What is the formula for $\hat{S}_z^{\; T}$ that acts on the eigenstates in the Hilbert space $H_1\otimes H_2\otimes H_3$ ?

Answer

$\hat{S}_z^{\; T}=\hat{S}_z^{\; 1}\otimes I\otimes I+I\otimes\hat{S}_z^{\; 2}\otimes I+I\otimes I\otimes\hat{S}_z^{\; 3}$

Question

Show that $\hat{{S}^{2}}^{(T)}$ commutes with $\hat{S}_z^{\; (T)}$ .

Answer

Using eq196 and eq201 in simple notation, $\left [\hat{{S}^{2}}^{(T)},\hat{S}_z^{\; (T)}\right ]=\left [\hat{S}_1^{\; 2}+2\hat{S}_1\cdot\hat{S}_2+\hat{S}_2^{\; 2},\hat{S}_{1z}+\hat{S}_{2z}\right ]$ . Expanding RHS of this equation and considering the following:

Use eq179 to find expressions for $\hat{S}_1^{\; 2}$ , $\hat{S}_2^{\; 2}$ and $\hat{S}_1\cdot\hat{S}_2$ .
$\hat{S}_{1i}$ and $\hat{S}_{2i}$ , where $i=x,y,z$ , act on different vector spaces and hence they commute with each other.
$[\hat{A}\hat{B},\hat{C}]=[\hat{A},\hat{C}]\hat{B}+\hat{A}[\hat{B},\hat{C}]$ and $[\hat{A},\hat{B}]=-[\hat{B},\hat{A}]$ .
Making use of eq165, eq166 and eq167.